This grease can be used for lubrication of the lead screw of the Z motor according to the maintenance schedule, please ensure that existing grease on the parts are cleaned off p...

Calibration Card

Y Linear Shaft 350mm long Compatible with Ultimaker Original+ Ultimaker 2 Ultimaker 2 Extended Ultimaker 2+ Ultimaker 2 Extended+

X Linear Shaft 320mm long Compatible with Ultimaker Original+ Ultimaker 2 Ultimaker 2 Extended Ultimaker 2 Go Ultimaker 2+ Ultimaker 2 Extended+

Ball Bearing 688-2RS Compatible with Ultimaker Original+ Ultimaker 2 Ultimaker 2 Extended Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 2 Go

Tube Coupling Collet for your Ultimaker Bowden Tube Replacing the TUBE Collet - Instructions

Z Motor With Trapeziodal Screw for your Ultimaker Original+, UM2,UM2+, UM3. This product is not compatible with the Ultimaker Original 

Print Head Shaft X 320mm Compatible with Ultimaker Original+ Ultimaker 2 Ultimaker 2 Extended Ultimaker 2+ Ultimaker 2 Extended+

Print Head Shaft X Compatible with Ultimaker Original+ Ultimaker 2 Ultimaker 2 Extended Ultimaker 2+ Ultimaker 2 Extended+

Ball Bearing F688-2RS (10ST) Compatible with Ultimaker Original+ Ultimaker 2 Ultimaker 2 Extended Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 2 Go

The Clip holds your glass plate in place over your heated bed.   Instructions on replacing the clips. - Instructions This part is compatible with the Ultimaker Original+ Ultima...

Electronics Pack with Main Board v2.1.4 and Jumpers Compatible with Ultimaker Original+ Ultimaker 2 Ultimaker 2 Extended Ultimaker 2 Go Ultimaker 2+ Ultimaker 2 Extended+

Clamp Clip- White Did you know you can also 3D Print these clips? You can download the STL File of the clamp clips from here, and print as many as you like. We recommend using T...

Print Head Shaft Y Compatible with UltiMaker 3

The Bowden tube, 70.5 cm long. Made from PFA. Outside diameter 0.25 inch, inside 0.125 inch is used to transport the filament to the extruder head. Includes two white Clamp Clip...

Linear bearings for the Print head, compatible with Ultimaker 2 Ultimaker 2 Extended Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 2 Go UMO UMO+

Mean Well Power Supply Unit - Model No GST220A24-R7B (24V / 9.20A) This power supply unit is compatible with: Ultimaker 2 Ultimaker 2 Extended Ultimaker 2+ Ultimaker 2 Extended...

Square Flanged Linear Bearing LMK12LUU (Misumi Brand) Compatible with Ultimaker 2 Ultimaker 2 Extended Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 2 Go Ultimaker Original+

***THIS Coupler IS FOR Ultimaker ORIGINAL and ORIGINAL +*** Feeder Quick Fit Coupling for your Material feeder

Ultimaker Feeder motor Part no 1017 Compatible with Ultimaker Original Ultimaker Original+

Z linear shaft for your Ultimaker Original and Original+

Injection Moulding Set, This product is compatible with the Ultimaker Original and the Ultimaker Original+.

UMO (1048)- Print Head Hot End Holder

Short Timing Belt for Ultimaker Original and Original+. This is NOT compatible with the Ultimaker 2 or 2+ **Only one Belt**

Long Timing Belt for Ultimaker Original and Original+. This is NOT compatible with the Ultimaker 2 or 2+ **Only one Belt**

UltiController Knob for your Ultimaker Original. This product is compatible with the Ultimaker Original and the Ultimaker Original+.

Controller Module for your UltiController.

Belt Pack for the Ultimaker Original and Original+. Includes 2 x Short Belts (Part 1085) 4 x Long Belts (Part 1086) This is NOT compatible with the Ultimaker 2 or 2+

The hot end bundle is fool proof when assembling. There is only one way to assemble it, no (more) small differences. It is leak free, so no need to use teflon tape or ABS to mak...

Ultimaker Original Knurled Drive Bolt Kit for your Material Feeder( Only for Ultimaker Original and Original+)

Part 1513- The heater cartridge 24V 40W is being used to heat your hot end. This part is compatible with the complete Ultimaker Original +.  ** It is not Compatible with the Ult...

Fan Pack for the UMO and UMO+ includes 1501 Print Head Fancap Metal 1512 Print Head Fan 24V DC