Olsson Nozzle - 0.5 Steel

Olsson Nozzle - 0.5 Steel


$25.00  Incl. GST

The steel nozzle is meant for printing abrasive materials. The steel is much stronger than the standard brass nozzle, however the downside is slower printing speed due to the lower thermal conductivity of steel.

Abrasive material like Carbon-Fibre tend to wear down brass nozzles very quickly.

Due to the lower conductivity, It is recommended to print at higher temperature and a slower speed.



Related Products

Adhesion Sheets
$42.90
Adhesion Sheets

Adhesion Sheets

Using an adhesion sheet is one of the most effective methods of ensuring your 3D print adheres to the build plate, producing consistent high-quality results. Learn how to apply ...

$42.90
×
BuildTak 203 x 203 mm
from $14.00
BuildTak 203 x 203 mm

BuildTak 203 x 203 mm

The Print surface of the BuiltTak is perfect prints even without heated bed, every time. Great for materials that require some additional help sticking to the bed. We would reco...

$14.00
×
Cleaning Filament
$32.90
Cleaning Filament

Cleaning Filament

The Ultimaker 3 cleaning filament is used for both print core maintenance and unclogging procedures. We recommend performing regular maintenance once every three months. Unclog ...

$32.90
×