Ultimaker 3

Ultimaker 3 3D Printer
  • Ultimaker 3
  • Ultimaker 3
  • Ultimaker 3
  • Ultimaker 3
  • Ultimaker 3
  • Ultimaker 3
  • Ultimaker 3
  • Ultimaker 3
  • Ultimaker 3


$5,249.00  Incl. GST

The Ultimaker 3 is the newest and most advanced 3D printer created by Ultimaker, which features sophisticated dual extrusion technology and advanced print head design. With its unique auto-nozzle lifting system, professional build and support material combinations, and swappable print cores, users can now achieve complex designs and improved 3D print performance that were previously only available through high-cost industrial rapid prototyping machines. Its powerful dual extrusion technology with dissolvable support enable designers, engineers and manufacturers to create complex geometries and achieve remarkable design intricacy with ease.

Ultimaker's focus on making 3D printing as user friendly as possible has resulted in seamless hardware, software and material integration that enable simple and efficient workflow, as well as maximum machine uptime. Ultimaker 3 is setting the new benchmark for professional desktop 3D printing once again and is making professional 3D printing accessible to everyone.

Main Features

 

The Print Head:

  • Dual extrusion: Combine build and water-soluble support materials to create complex mechanical parts and intricate surfaces or choose to print with two colours. Ultimaker 3’s unique auto nozzle-lifting system ensures a smooth, professional finish with every print
  • Swappable print cores: Faster print core changes mean higher uptime and easier maintenance. Your Ultimaker 3 comes with 2 x print cores (AA) for build materials, and 1 x print core (BB) for support materials. There’s a customised nozzle geometry per material – ensuring lower clogging risks and a more reliable 3D printing experience
  • New optimised cooling: Ultimaker 3 has a powerful, low-noise fan system. Featuring two new radial fans and fan shrouds, it creates greater pressure build-up for an improved airflow. This ensures better cooling, high quality bridging, faster print runs and smooth print surfaces
  • LED status indicators: Print core LED lights ensure an optimised 3D printing experience by alerting if any user interaction is needed

Superior 3D Printing Experience:

  • Optimised Cura material profiles: Extensively tested preconfigured Cura profiles make for a smoother, more seamless 3D printing experience by automatically adjusting the necessary settings for each material and print core. Produce consistent, quality results with every print
  • Material recognition with NFC scanner: Built-in material recognition system ensures your 3D printer is primed and ready for the task. Ultimaker 3 detects and identifies the material on the reel holder and checks the correspondence of a filament and print core type being used
  • EEPROM print core chip: The EEPROM chip in the print core memorises the size and type of your nozzle, notifies you in case of misuse and, as a result, helps achieve higher print success rates

Simple Controls and Connectivity:

  • USB port: Enjoy standalone printing using a USB stick (16GB included)
  • Wi-Fi / LAN: Send your print project quickly and easily to your Ultimaker 3 via Cura
  • Live camera: Monitor every stage of your 3D printing project remotely by simply connecting to your Ultimaker 3’s Wi-Fi network. The result? Optimised workflow and exceptional control

Heated Build Plate:

  • Active levelling: The capacitive sensor in the print head measures distances between the print bed and the nozzle, and the tilt angle is compensated by adjusting the z height in the first layers. The result? More accurate levelling and improved build plate adhesion
  • New refined design: The Ultimaker 3 features a build plate that’s lighter and stiffer, which reduces vibrations and helps produce an unrivalled print quality. The removable glass plate makes it easy to access your prints
  • Heated build plate: Thanks to the heated glass build plate, you can print using many different materials and with improved build plate adhesion

Feeder:

  • Dual geared feeders: Geared feeders exert more force on the filament, and also eliminate heat exposure from the motor. Change your 3D printing materials with ease, select the correct pressure with a push on a button, and use the lever function to manually insert or remove a filament. More control means more successful, reliable and durable 3D print results, without compromise

Industrial Grade Materials:

  • Ultimaker materials: Print with a wide range of materials, including Nylon, PLA, ABS, CPE, CPE+, PC, TPU 95A, PP and PVA. Combine two build materials for dual-colour 3D prints or achieve state-of-the-art complexity with build and water-soluble support material combinations (Nylon/PVA, PLA/PVA, and CPE/PVA). For more info on material compatibility, please click here to visit to Ultimaker's material compatibility page.
  • NFC material scanner: Your Ultimaker 3 identifies the material that is being loaded and checks the correspondence of the filament and print core type you are using. Coupled with our extensively tested preconfigured material profiles in Cura, the Ultimaker 3’s material recognition system ensures your 3D printer is set for the highest-quality results
  • Open filament system: With our integrated ecosystem of reliable hardware, extensively tested materials and cutting-edge software, you are guaranteed the highest level results and optimised 3D printing experience. Yet, thanks to the Ultimaker open filament system, you have the freedom to try and test other types of existing filaments or manufacture your custom solution that would match your specific requirements

Specifications / Features (Download Specification Sheet)
Technology: Fused Filament Fabrication
Print head: Dual nozzle, with lifting mechanism on 2nd nozzle. Easily swappable print cores
Build volume: Single nozzle: 215(X) x 215(Y) x  200(Z) mm, Dual material: 197(X) x 215(Y) x 200(Z) mm *(refer to the note below on build volume)
Filament diameter: 2.85 mm
Layer resolution: 0.4 mm nozzle: 20 - 200 micron
Step accuracy: X 12.5, Y 12.5, Z 2.5 micron
Print head travel speed: 30 - 300 mm/s
Material flow rate: 0.40: up to 16 mm3/s
Build plate: Heated glass bed
Material types: PLA, PVA, ABS, CPE, CPE+, Nylon, PC, TPU 95A, PP
Nozzle diameter: 0.4mm
Nozzle temperature: 180 - 280 degree Celsius
Build plate temperature: 20 - 100 degree Celsius
Nozzle heat up time: < 2 min
Build plate heat up time: < 4 min (20 to 60 degree Celsius)
Average operation noise level: 50 dBA
Nozzle replacement: Easily swappable print cores
Filament system: Open, reel holder incl. guide for 2 spools of 750g filament. NFC system to automatically detect material type
Connectivity: Wifi, ethernet, stand alone via USB-drive
Bed levelling: Active levelling
Camera: Built-in

*Note on build volume: The X and Y dimensions specified are representative of the maximum size you can print in the X and Y directions. It is not possible to print a cube of the specified build volume as you have to take into account clearances for the four retainer clips of the glass print bed. Other factors/ software settings including the use of prime tower, ooze shield, skirt, and brim will also reduce the overall build volume. Please kindly contact us if you have any questions regarding the build volume.

Materials / Consumables Included
Your Ultimaker 3 comes with the following items:
1x Ultimaker Silver Metallic PLA Filament (350g)
1x Ultimaker PVA Filament (350g)
2x 0.4 mm Print Core AA (for build materials - PLA, Nylon, ABS, CPE, CPE+, PC, TPU 95A, PP)
1x 0.4 mm Print Core BB (for support materials - PVA)
1x Magnalube-G (for Z axle lubrication) - Download Safety Data Sheet
1x Unilube (for X and Y axles lubrication)
1x Glue Stick

    Physical Dimensions
    Printer outer dimensions (incl. Bowden tube & spool holder): 342 x 505 x 588 mm
    Printer outer dimensions (excl. Bowden tube & spool holder): 342 x 380 x 389 mm
    Nett Weight: 10.6 kg

    Software
    Supplied software: Cura 2 - Official Ultimaker Software
    Supported OS: Windows, Mac, Linux
    File types: STL, OBJ, 3MF
    File transfer: Print direct from Cura via network/ Stand alone printing via USB-drive

    Warranty
    12 Months*
    *Print cores are consumable parts that will wear over time and are not covered under warranty. The frequency of replacement required for the print cores depends on the amount of usage and the types of filament used. Please kindly contact us if you require more information.

    **CAUTION, THIS PRODUCT CONTAINS PARTS AND ASSEMBLIES SUSCEPTIBLE TO DAMAGE BY ELECTROSTATIC DISCHARGE (ESD). ACCESSING THE PROTECTED ELECTRONICS MAY VOID YOUR WARRANTY**

    Further Information:

    Ultimaker 3 User Manual

    General Product Safety and Compliance Information

    More information regarding Ultimaker 3 can be found here.



    Related Products

    Ultimaker 3 Extended
    $6,399.00
    Ultimaker 3 Extended

    Ultimaker 3 Extended

    The Ultimaker 3 Extended shares all the excellent features of the Ultimaker 3, and has an even bigger build volume. It is the newest and most advanced large-format 3D printer c...

    $6,399.00
    ×
    Ultimaker 2+
    $3,449.00
    Ultimaker 2+

    Ultimaker 2+

    Ultimaker 2+ is the latest version of the award-winning Ultimaker 2 3D printer. It features powerful innovations which are the results of Ultimaker's advanced understanding of ...

    $3,449.00
    ×
    Ultimaker 2 Extended+
    $4,449.00
    Ultimaker 2 Extended+

    Ultimaker 2 Extended+

    Ultimaker 2 Extended+ is the latest version of the award-winning Ultimaker 2 Extended 3D printer. Ultimaker 2 Extended+ shares all the excellent features of Ultimaker 2+, and h...

    $4,449.00
    ×