UMS5 - 0.6 mm Print Core CC RED

UMS5 - 0.6 mm Print Core CC RED
  • UMS5 - 0.6 mm Print Core CC RED
  • UMS5 - 0.6 mm Print Core CC RED


$549.00  Incl. GST

Main Features

0.6 mm diameter nozzle
Precision-machined brass nozzle with a wear-resistant ruby cone at its tip
Specially customized internal geometry prevents clogging
Features the same quick-swap design as other Ultimaker print cores for fast changeovers with no tooling and maximum uptime
Each print core CC Red 0.6 is packaged with four spare Ultimaker S5 nozzle covers for long-term use

Development

Design tested to print 10 kg of carbon fiber filament with no loss of print quality, and 1,000 plus hours of extrusion. (In comparison, a typical brass nozzle can print about 0.3 kg and hardened steel 3 kg of such material before print quality is reduced)


Performed over 1,000 heat cycles and 2,000,000 retractions in testing
Developed in collaboration with engineer and Ultimaker community member Anders Olsson

Other Info


Enables printing with abrasive composite materials (i.e. a plastic filament reinforced with fibers, such as carbon, glass, ceramics, or metal)

Preconfigured profiles for advanced composites from world-leading material companies are available via Ultimaker Cura, for a hassle-free 3D printing experience


The print core CC Red is compatible with the Ultimaker S5. (It is not compatible with the Ultimaker 3 because its feeder is not wear-resistant for printing with abrasive materials. If a user loads a Print Core CC onto an Ultimaker 3, a warning that it is not compatible with the printer will appear. Users can either adhere to the warning or ignore the warning and continue printing at their own risk)

 

 



Related Products

Adhesion Sheets
$49.90
Adhesion Sheets

Adhesion Sheets

Using an adhesion sheet is one of the most effective methods of ensuring your 3D print adheres to the build plate, producing consistent high-quality results. Learn how to apply ...

$49.90
×
BuildTak 228mmx 254mm
from $22.00
BuildTak 228mmx 254mm

BuildTak 228mmx 254mm

The Print surface of the BuiltTak is perfect prints even without heated bed, every time. Great for materials that require some additional help sticking to the bed. We would reco...

$22.00
×
Cleaning Filament
$34.90
Cleaning Filament

Cleaning Filament

The Ultimaker 3 cleaning filament is used for both print core maintenance and unclogging procedures. We recommend performing regular maintenance once every three months. Unclog ...

$34.90
×