Free Olsson Block - Ultimaker Limited Promotion

Between the 9th of November to the 15th of December 2015, Imaginables and Ultimaker are working together to bring you a very special promotion offer for all new purchases of the Ultimaker 2 and the Ultimaker 2 Extended. For a limited time, all new purchases of Ultimaker 2 and Ultimaker 2 Extended will receive a free Olsson Block Kit. Including this Olsson kit means that your printer will come with 6 nozzles in total! (including the one already installed and the spare Hot-end Bundle) 

This offer will also be available through all our participating reseller in your respective states.

** Please note that the Olsson block may be shipped to you separately at a later date depending on availability. Existing Customer waiting to purchase the Olsson Block kit separately will need to wait until further stock can be acquired **

 

So what is an Olsson Block? It’s a modification for the Ultimaker 2 or 2 Extended 3D printer that allows the extruder nozzle to be swapped within seconds, as opposed to replacing the entire heater block every time. This lets you pick your nozzle on-the-go to fit your particular needs. Created by Anders Olsson, whose story we have detailed in a recent blog, the amazing kit consists of a threaded heater block, installation tools and four nozzles in varying diameters: the standard 0.4mm size nozzle, a smaller 0.25mm nozzle, and a bigger 0.6 and 0.8mm nozzle.

This giveaway means that many makers will now enjoy the freedom to choose the nozzle that is the best fit for their project – for free. If you need large prototypes printed fast, the 0.8mm nozzle will let you extrude the most amount of plastic in the shortest amount of time. If instead your print requires high detail, the 0.25mm nozzle will let you print extremely small objects or give your normal prints an extremely smooth and detailed finish. The 0.4mm and 0.6mm nozzles represent varying balances between these two extremes.

 For installation instructions simply visit the installation guide on the support section of our website. Or if you prefer, sit back and watch the following instruction video to see how easy it is to upgrade your printer:

Disclaimers: The content of the webinars, podcasts, videos, etc contained on, linked by or referred to on this page may have been created and/or owned by the relevant brand owners or other third parties. As such, Imaginables cannot warrant or make any representation as to the content's suitability or reliability.