Automate Cleaning With Form Wash

Simply set the appropriate time and let Form Wash get to work.

10 Minutes

Default wash time when using fresh isopropyl alcohol (IPA).

7 - 15 Liters

Flexible solvent volumes to wash parts of all sizes.

120 Prints

Number of prints per IPA refill with regular use. Wash 67% more parts before replacing solvent compared to the previous generation.

1. Elevator- A flat plate with mounting points for the basket and build platform mount arms. Raises and lowers to wash and automatically dry printed parts.
2. Build platform mount arms- Adjustable arms hold the build platform when washing parts on the platform.
3. Basket- Removable container holds parts to wash without the build platform. A single hook secures the basket to the elevator to raise and lower.
4. Impeller- Couples to the Form Wash using magnets and agitates the solvent during the wash cycle.
5. Display- Shows status, time, and options for configuring the Form Wash.
6. Knob- Turn or press to adjust time and to start, pause, or end a wash cycle.
7. Outer lid-Limits solvent evaporation. Keep the lid closed when not in use.
8. Inner lid- A hinged, secondary lid opens and closes to contain solvent while allowing parts to be lowered or raised from the bucket.
9. Wash bucket- Removable container holds a maximum of 16.22 L of solvent. A rotating impeller at the bottom circulates the solvent.
10. Hydrometer- If using isopropyl alcohol (IPA) as a solvent (or another solvent with an equivalent specific gravity), float in IPA to measure the IPA's resin concentration (based on previous calibration in fresh IPA). Other solvents may require a different hydrometer for a different specific gravity range.
11. Power supply- Provides power to the Form Wash. Specifications: 24 V, 2 A.

• Wash Bucket
• Wash Basket
• Hydrometer
• 2x Platforms Mounts

• 90–240 V
• 2.0 A 50/60 Hz
• 50W

• Formlabs Resin Washing Solution
• IPA
• TPM
• Water