0.8 mm Print Core AA (for Build Material)

0.8 mm Print Core AA (for Build Material) - Imaginables | Ultimaker & Dremel 3D Printers


$189.90  Incl. GST

Professional 3D printing just got more accessible. Maximise the print performance and machine uptime with our swappable, material-matching print cores. Make the most out of reliable build and support material combinations for geometric freedom or print in dual colour. Print Core AA 0.8mm can speed up your printing (as compared with Print Core AA 0.4mm) when printing build materials. 

Main Features

  • Material matching: Get consistent, high-quality 3D printing results with customised nozzle geometry per material, whether it’s an engineering build material or soluble support
  • Quick-to-change: Quickly swap print cores and switch between different material combinations for a more time-efficient workflow
  • More materials: Select from a huge portfolio of materials, including PLA, ABS, CPE, Nylon, TPU 95A, and PP (CPE+ and PC are not officially supported for 0.8 mm Print Core AA, refer to the Specifications section below for more info on supported materials)
  • Accurate temperature reading: Maintain the perfect temperature for an even better quality print – with automatic, accurate temperature readings

Specifications:

Supported materials*:
0.8 mm Print Core AA: PLA, ABS, CPE, Nylon, TPU 95A, PP (CPE+ and PC are not officially supported for 0.8 mm Print Core AA, only 0.4 mm Print Core AA are officially compatible with CPE+ and PC). For more info on material compatibility, please click here to visit Ultimaker's material compatibility page.
*Do not use Print core AA for PVA support material

Nozzle size:
0.8mm

More information regarding Ultimaker 3 print cores can be found here.

*** UPDATE 11th May 2018***

Please note that new versions of the print core do not have silicon rings.

"The silicone nozzle ring has been removed from the nozzle of the print cores. The groove in the nozzle to fixate the silicone nozzle ring will also be removed on a short term. This applies to the print cores that come with the printer, as well as print cores that were purchased separately. This change is implemented to make the print cores compatible with the Ultimaker S5. Due to the nozzle cover of the Ultimaker S5, the front fan bracket will not close properly if the silicone nozzle ring is around the nozzle. On the Ultimaker 3, the silicone nozzle ring helps to close the seal between the nozzle and the silicone cover. However, R&D has decided the risk of removing the ring is negligible.

The print cores still function exactly the same on the Ultimaker 3. Customers can use the new print cores in the same way as the old ones that did include the silicone nozzle ring. Print cores with and without silicone nozzle rings can both be used on the Ultimaker 3."

 



Related Products

0.25 mm Print Core AA (for ...
$189.90
0.25 mm Print Core AA (for Build Material)

0.25 mm Print Core AA (for Build Material)

Professional 3D printing just got more accessible. Maximise the print performance and machine uptime with our swappable, material-matching print cores. Main Features Material...

$189.90
×
0.4 mm Print Core AA (for B...
$189.90
0.4 mm Print Core AA (for Build Material)

0.4 mm Print Core AA (for Build Material)

Professional 3D printing just got more accessible. Maximise the print performance and machine uptime with our swappable, material-matching print cores. Make the most out of rel...

$189.90
×
0.4 mm Print Core BB (for S...
$189.90
0.4 mm Print Core BB (for Support Material)

0.4 mm Print Core BB (for Support Material)

Professional 3D printing just got more accessible. Maximise the print performance and machine uptime with our swappable, material-matching print cores. Make the most out of rel...

$189.90
×