Polymax PLA 750g

Polymax PC Max 750g - Imaginables | Ultimaker & Dremel 3D Printers
  • Polymax PLA 750g
  • Polymax PLA 750g
  • Polymax PLA 750g


$69.95  Incl. GST

PolyMax™ is a family of advanced 3D printing filaments produced with Polymaker’s Nano-reinforcement technology, to deliver exceptional mechanical properties and printing quality. PolyMax™ PLA is an incredibly easy-to-print filament with improved mechanical properties, making it an excellent alternative to ABS.

PolyMax™ PLA features Polymaker's Nano-reinforcement technology:

Jam-Free™ - Jam-Free™ technology improves the heat stability of Polymaker’s PLA filaments with softening temperatures over 140 °C. As a result, Polymaker’s PLA filaments show minimal softening in the “cold end” and can melt rapidly once entering the heating zone, leading to excellent printing quality with zero risk of nozzle jams caused by heat creep.

Nano-reinforcement - Nano-reinforcement technology is applied to produce filaments with excellent mechanical properties and printing quality. It dramatically improves the toughness of the material by increasing its impact resistance.

Superior Toughness - Regular PLA is a very brittle material which greatly limits its range of applications. PolyMax™ PLA exhibits vastly superior impact strength with up to 20% improvement when compared to regular ABS and up to 9 times that of regular PLA and PLA+ materials. 

Ductile - Parts printed in PolyMax™ PLA display excellent ductility, suitable for snap fit componentry.

Safe and Clean - Polymaker use only PLA resins from Nature Works for the filaments manufacture.

Easy-to-print - The outstanding mechanical strength of PolyMax™ PLA is achieved with no compromise in printing quality. PolyMax™ PLA prints easily with no heated bed required. A heated bed can be used for best results (up to 60°C).

Quality Control - Polymakers leading quality control process and rigorous in-house testing, ensure reliable printing and consistency across spools and batches.

 

Technical Data Sheet

Safety Data Sheet

 

Print Settings

Nozzle Temperature: 
190˚C – 230˚C

Printing Speed:
40mm/s – 60mm/s

Bed Temperature:
25˚C – 60˚C

Bed Surface:
Glass with glue, Blue Tape, BuilTak®

Cooling Fan:
ON

 

Note: Based on 0.4 mm nozzle and Simplify 3D v.3.1. Printing conditions may vary with different printers and nozzle diameters



Related Products

Ultimaker TPU 95A
$119.90
Ultimaker TPU 95A

Ultimaker TPU 95A

Weight: 0.75kg  Diameter: 2.85mm ULTIMAKER TPU 95A: WEAR AND TEAR RESISTANT Ultimaker TPU 95A is an easy and fast to print filament with a nice balance of flexibility, wear and ...

$119.90
×
Ultimaker Tough PLA
$86.90
Ultimaker Tough PLA

Ultimaker Tough PLA

Ultimaker Tough PLA Weight: 0.75kg Diameter: 2.85mm Length: Approximately 90m long Ultimaker Tough PLA combines impact, tensile and flexural strength similar to ABS, all with th...

$86.90
×
Ultimaker PVA - 750g
$169.90 Sold Out
Ultimaker PVA - 750g

Ultimaker PVA - 750g

PVA (Polyvinyl Alcohol) is a water soluble support material for multi-extrusion 3D printing. With a good thermal stability, Ultimaker PVA is ideal for printing complex models t...

$169.90
Sold Out. Check back soon.
×