UltiMaker PVA - 750g

Ultimaker PVA - 750g - Imaginables Australia | Ultimaker & Dremel 3D Printers
  • UltiMaker PVA - 750g
  • UltiMaker PVA - 750g


$169.90  Incl. GST

PVA (Polyvinyl Alcohol) is a water soluble support material for multi-extrusion 3D printing. With a good thermal stability, Ultimaker PVA is ideal for printing complex models that require supports for large overhangs, deep internal cavities, and intricate geometries. Designed for a seamless 3D printing experience, our PVA provides good adhesion to both PLA and Nylon. As a water soluble support material, Ultimaker PVA empowers engineers and designers to create highly detailed surfaces and complex moving mechanical parts in just one run. Coupled with the right build materials and our proven material profiles in Cura for Ultimaker 3, our PVA opens up a whole new world of opportunities for intricate designs and versatile applications.



Main Features

  • Thermal stability: Good thermal stability resulting in better degradation resistance compared to other PVA filaments
  • Moisture sensitivity: Less moisture sensitive than other PVA filaments
  • Superior adhesion: Great adhesion to both PLA and nylon
  • Safe dissolution: Safe dissolution in tap water (no harmful chemicals required)
  • Biodegradable: Biodegradable with no hazardous by-product

Quick Guide to Removing Ultimaker PVA Supports from your 3D Print

  1. Submerge: Put your 3D print in cold or warm water depending on the build material
  2. Rinse: After PVA supports are dissolved, rinse the 3D print to remove any excess PVA solution
  3. Dry: Let the 3D print dry and apply additional post processing to the build material if necessary

*Information on how to print and store Ultimaker PVA material can be found here.

*Information on how to dissolve Ultimaker PVA material can be found here.

***CAUTION - PVA IS SUSCEPTIBLE TO HIGH HUMIDITY AND MOISTURE. KEEP PVA IN COOL DRY ENVIRONMENT BELOW 50% HUMIDITY TO ENSURE THE BEST 3D PRINTING EXPERIENCE***

 Safety Data Sheet and Technical Data Sheet



Related Products

UltiMaker TPU 95A
$119.90
UltiMaker TPU 95A

UltiMaker TPU 95A

Weight: 0.75kg  Diameter: 2.85mm ULTIMAKER TPU 95A: WEAR AND TEAR RESISTANT Ultimaker TPU 95A is an easy and fast to print filament with a nice balance of flexibility, wear and ...

$119.90
×
UltiMaker Tough PLA
$86.90
UltiMaker Tough PLA

UltiMaker Tough PLA

Ultimaker Tough PLA Weight: 0.75kg Diameter: 2.85mm Length: Approximately 90m long Ultimaker Tough PLA combines impact, tensile and flexural strength similar to ABS, all with th...

$86.90
×
UltiMaker PVA - 350g
$86.90
UltiMaker PVA - 350g

UltiMaker PVA - 350g

Please be advised we do not recommend using 350gram PVA in combination with the Material station. Please kindly use 750gram PVA roll as it will reduce the chances of issues wit...

$86.90
×