$1,527.90 Incl. GST
Pre-Order : ETA Late November
Form Studio 1 is the first affordable, professional-grade resin 3D printer with a powerful, long-lasting print engine and an open platform. Print most parts in under two hours with razor-sharp detail and a workflow that's safe, reliable, and mess-free from start to finish. Paired with Alpha Resins and the Formlabs VOC Extractor, Form Studio 1 is the first and only resin printer with UL GREENGUARD Gold Certification for low chemical emissions.
- Blazing fast: Most parts print in under two hours, with speeds up to 130 mm/h on Alpha Fast Resin.
- Amazing parts: A 35 µm pixel, anti-aliasing, and resins tuned to the light engine deliver sharp edges and smooth surfaces.
- Automatic resin handling: Integrated, hands-free dispensing with glove-free material swaps in under a minute.
- Open platform:Open Material Mode is included, so customers can print in any 405 nm resin with no license fee.
- Reliable by design:Five intelligent control systems monitor temperature, resin level, print force, and print status on every job.
Form Studio 1 sits below the Form 4 and is complementary to it, not a replacement. Form Studio 1 is best for form-and-fit prototyping, figurines, models, and props; Form 4 remains the choice for functional prototyping, rapid tooling, and end-use parts.
Form Studio 1 Tech Specs
| Layer Thickness |
25–250 µm1
|
| XY Resolution |
35 microns2
|
| Technology |
Masked Stereolithography (mSLA) |
| Print Engine |
Low Force Display™ (LFD) |
| Light Source |
Backlight Unit with
28 uniform wavelength LEDs |
| Build Volume (L x D x H) 3
|
20.0 x 12.5 x 23.5 cm
7.9 x 4.9 x 9.3 in
200 x 125 x 235 mm |
| Build Volume |
5,875 cm3
5.875 liters |
| Build Area |
250 cm2
38.8 in2
|
| Optical Power Intensity |
6 mW/cm2 delivered
to the print plane |
| Optical Wavelength |
405 nm |
1 - Layer thickness varies by material. Layer thickness availability varies by material. View our materials compatibility table to confirm availability.
2 - XY resolution describes the pixel size of the light engine in XY (horizontal plane). That said, while XY resolution contributes to how precise the print is, it is not the only factor.
3 - For any print job taller than 21.5 cm [8.5 in] you have to remove the resin tank while removing the Build Platform with your print. PreForm will display a warning when print jobs are above 21.5 cm.
Disclaimer: The content on this page or contained in the links has been obtained from Formlabs, Imaginables has not verified the content and does not warrant or make any representation as to the content's accuracy. Customers should satisfy themselves as to the suitability of the product and their use, as well as the compliance with all applicable laws and regulations.
