Put the finishing touches on your parts quickly and easily with the comprehensive Form 4 Finish Kit, keeping your workspace clean and organised. Includes two rinse buckets, rinse basket, removal tool, plastic tank scraper, Build Platform jig, flush cutters, squeeze bottle, and disposable nitrile gloves.

Please refer to Formlabs' instructions on setting up your finishing kit.

1. Rinse buckets: Two plastic buckets to be partially filled with solvent.
2. Rinse bucket lids: Two plastic lids to cover the rinse buckets.
3. Rinse basket: Use to transfer parts from one bucket to the next. The basket can rest on the edge of the rinse bucket to allow parts to drip.
4. Rinse bottle: Remove resin trapped in cavities and internal channels of prints. Use clean solvent. Formlabs recommends isopropyl alcohol.
5. Flush cutters: Snip to separate prints from their supports. Cut with the flat side on the prints’ surface for minimal support marks.
6. Removal tool: Pry under the raft to remove prints from the build platform. Do not use the removal tool to clean the resin tank interior.
7. Metal scraper: For cleaning the build platform print surface and removing prints from the build platform. Do not use the metal scraper to clean the resin tank interior.
8. Plastic tank scraper: For inspecting and cleaning the resin tank interior. Do not press into the tank film with the corners of the tool.
9. Build platform jig: Provides a place to secure the build platform as you work on removing your printed part.
10. Non-reactive nitrile gloves: Wear gloves when handling liquid resin, resin-coated surfaces, or solvent. Wash skin with plenty of soap and water.
11. PEC*PADs: Disposable lint-free, non-woven microfiber cloths for cleaning the printer’s optical components.