The Form 4L Finish Kit helps keep your workspace clean and organized while putting the finishing touches on your large 3D printed parts.

This large-scale rinse bucket allows you to rinse prints directly on the build platform or after removal.

Put the finishing touches on your parts quickly and easily with the comprehensive Form 4L Finish Kit, keeping your workspace clean and organized. Includes two rinse buckets, rinse basket, removal tool, plastic tank scraper, Build Platform jig, flush cutters, squeeze bottle, and disposable nitrile gloves.

Setting up your finishing kit - Link

1. Rinse bucket: Fill the rinse bucket with solvent to the FILL TO HERE marking before washing prints. The rinse bucket includes a ground wire to prevent static discharge. Formlabs recommends isopropyl alcohol or tripropylene glycol monomethyl ether.
2. Rinse basket: Place prints in the rinse basket, place the rinse basket into the rinse bucket, and agitate to clean.
3. Rinse bottle: Remove resin trapped in cavities and internal channels of prints. Use clean solvent. Formlabs recommends isopropyl alcohol.
4. Disposable nitrile gloves: Wear gloves when handling liquid resin, resin-coated surfaces, or solvent. Wash skin with plenty of soap and water.
5. Battery operated solvent pump: Fill and empty the rinse bucket.
6. Build platform jig: Stabilize the build platform for the secure removal of prints.
7. Drying tray: Place washed prints on the drying tray to drip dry.
8. Flush cutters: Snip to separate prints from their supports. Cut with the flat side on the prints’ surface for minimal support marks.
9. Plastic tank scraper: Use to inspect and clean the Form 4L resin tank.
10. Metal scraper: Use to remove parts from the build platform. Do not use this tool to inspect the Form 4L resin tank.
11. Cleaning cloths: Disposable lint-free, non-woven microfiber cloths for cleaning the printer’s optical components.