Post-curing maximizes material properties for stereolithography prints, improving parts' strength and performance. For biocompatible materials, post-curing is necessary to achieve the safety standards determined by regulatory agencies. Form Cure precisely combines heat and 405 nm light to consistently post-cure prints.
Automate Post-Curing With Form Cure
Precisely controlled temperature and light to cure 3D printed parts to optimal performance properties. |
| Advanced Heating |
Preheat the chamber and waste no time getting parts ready for optimum post-curing. |
| Uniform Exposure |
Provide consistent curing with a rotating turntable. |
| Maximize Material Properties |
Leverage Form Cure's default time and temperature settings unique to each material for optimum performance. |
| Rapid, High-Intensity Curing |
Bring temperatures up to 80°C while 13 multi-directional LEDs emit the optimal wavelength of light for fast, effective curing. |
|
Unlock Peak Performance
Form Cure is finely tuned to bring parts to their maximum mechanical properties.
80 Degrees Celsius
An advanced heating system precisely controls curing temperatures up to 80 °C.
405 Nanometers
3 multi-directional LEDs emit the optimal wavelength of light for curing Formlabs materials.
1 Revolution per Minute
A rotating turntable provides uniform exposure during post-curing.
|
 |
Technical Specifications
| Printer Compatibility |
Form 4, Form 4B, Form 3, Form 3L, Form 3B, Form 3BL, Form 2 |
| Dimensions |
26.2 x 26.2 x 34.0 cm
Height when open: 64 cm |
| Weight |
5.6 kg |
| Turntable Diameter |
19.3 cm |
| Maximum Part Height |
18.5 cm |
| Suggested Operating Environment |
Suggested 18—28 °C |
| Maximum Cure Chamber |
80 °C |
| Light Source |
13 multi-directional LEDs |
| Power Requirements |
- 90–240 V
- 6.0 A 50/60 Hz
- 144 W
|
| LED Power |
39 W |
| LED Radiant |
9.1 W |
| LED Wavelength |
405 nm |
Disclaimer: The content on this page or contained in the links has been obtained from Formlabs, Imaginables has not verified the content and does not warrant or make any representation as to the content's accuracy. Customers should satisfy themselves as to the suitability of the product and their use, as well as the compliance with all applicable laws and regulations.
