Take advantage of our amazing offer, purchase an UltiMaker S7 Pro Bundle and get a PVA Removal Station for FREE! Offer ends 15th December 2023.
UltiMaker S7 Pro Bundle
Bundle and Save
Purchase UltiMaker S7 with Material Station together as a bundle to enjoy great savings!
The UltiMaker S7 Pro Bundle adds the Material Station to our newest S Series 3D printer - Ultimaker S7, transforming it into a manufacturing powerhouse. This one-of-a-kind upgrade further simplifies the 3D printing workflow with automatic switching of up to 6 spools. And constant humidity control ensures material is delivered in perfect condition for high-quality 3D prints.
The Material Station brings to the UltiMaker S7 high-quality 3D printed parts and models at maximum output. Its huge capacity and humidity-controlled material handling increases print success rate, print quality, and uptime to unlock 24/7 reliable production – while minimising human error, print job time, and operator time.
Designed and tested to be left unattended, the Material Station allows the UltiMaker S7 to print longer – day or night. Whether a print job requires a different loaded material, or a spool runs out, it automatically switches.
Reduced operator time
Loading material into the Material Station takes seconds – not minutes. Simply open the door, drop the spool into a bay, and guide it to either extruder. During a print, any spool that is not being used can be switched out.
Minimised print job time
The Material Station means the UltIMaker S7 can handle a wider range of print jobs. NFC material recognition informs UltiMaker Digital Factory which spools are loaded and will optimally manage your job queue – minimising downtime.
The Material Station on the UltiMaker S7 Pro Bundle stores material in an environment below 40% relative humidity. This keeps the filaments pristine and leads to higher print success. It's like the spool never left its packaging.
The UltiMaker S7 Pro Bundle optimises the delivery of 3D printing materials so you don't have to. Its closed, humidity-controlled chamber keeps filament in perfect condition. And while 3D printing, it reliably detects when one spool runs out of filament and automatically switches to another. This helps to avoid human error and achieve better-quality prints.
Consistent material quality by humidity control
Humidity, dust... The Material Station defeats them both. Just plug it in and its silica gel will extract moisture and automatically regenerate, keeping the fully enclosed chamber below 40% relative humidity – even in outside conditions of up to 70% humidity.
The Material Station makes running out of filament a thing of the past. Instead, you can get the most out your materials by printing right to the end of a spool. Each filament bay in the Material Station has run-out detection and will switch spools automatically.
Reduced chance on human errors in material handling and storage
The Material Station reduces the risk of human error in material handling and storage. Ejected filament always retracts with a clean, sharp tip. And moisture-sensitive filament can be safely left in the humidity-controlled chamber.
The Material Station integrates with the UltiMaker S7, Cura, and the Digital Factory. With six front-loading NFC material bays and a simple design, it's never been easier to load, insert, and print with almost any combination of polymers and abrasive composites to unlock more 3D printing applications.
Front loading for fast changeovers
With the Material Station, say goodbye to the back of the UltiMaker S7. Load and eject material from the front – even while another spool is printing. Simply place any material in any bay, insert the filament in extruder hole 1 or 2, and press the eject button to remove it.
Load third-party polymers and composites
With abrasive-resistant prefeeders in every bay, the UltiMaker S7 Pro Bundle enables loading, printing, and storage with more third-party materials – including glass and carbon fiber composites.
Product Data Sheet
UltiMaker 3D Printers Comparison Sheet