Ultimaker 2+ is the latest version of the award-winning Ultimaker 2 3D printer. It features powerful innovations which are the results of Ultimaker's advanced understanding of 3D printing technology, and the successful collaborations between Ultimaker and its large and supportive user community. The newest upgrades make this already impressive 3D printer even better and easier to use, making it one of best 3D printer available right now.
Geared Feeder: Innovative and more powerful feeder design improves print quality and reliability, as well as enabling user to change filament and choose the optimum tension setting for the filament with ease
Swappable Nozzle: Clever print head design allows print head nozzle to be swapped easily and fast, user can choose the preferred nozzle to achieve either highly detailed or extremely fast prints
Optimised Airflow: Newly re-designed fancaps will channel airflow precisely to where it should be to enhance the print results
More information regarding Ultimaker 2+ can be found here.
Layer resolution: 600 to 20 micron
Build volume: 22.3(X) x 22.3(Y) x 20.5(Z) cm *(refer to the note below on build volume)
Position precision : X 12.5 / Y 12.5 / Z 5 micron
Print head travel speed: 30 - 300 mm/s
Recommended filament diameter: 2.85 mm
Nozzle diameters (swappable nozzle): 0.25, 0.4, 0.6, 0.8 mm
Stand-alone SD-card printing
Heated bed operating temperature: 50° - 100°C
*Note on build volume: The X and Y dimensions specified are representative of the maximum size you can print in the X and Y directions. It is not possible to print a cube of the specified build volume as you have to take into account clearances for the four retainer clips of the glass print bed. Other factors/ software settings including the use of skirt and brim will also reduce the overall build volume. Please kindly contact us if you have any questions regarding the build volume.
Included: SD Card, Glue Stick, Lubrication Grease, Hex Wrenches, USB Cable, Swappable Nozzles (Nozzle Diameters 0.25, 0.4, 0.6, 0.8 mm), 1 Spool Ultimaker PLA, Cura Software, Ultimaker App, Calibration Card (For Buildplate Leveling)
More information on the advantages of choosing Ultimaker 2 family of 3D printers can be found here.
* PTFE Coupler and Print Head Nozzle are consumable parts that will wear over time and are not covered under warranty. The frequency of replacement required for the PTFE Coupler or the Print Head Nozzle depends on the amount of usage and the types of filament used. Please kindly contact us if you need more information.
Please refer to our Safety and Compliance page for more information about the product.