UM3 - 0.25 mm Print Core AA (for Build Material)

UM3 - 0.25 mm Print Core AA (for Build Material)


$184.90  Incl. GST

Professional 3D printing just got more accessible. Maximise the print performance and machine uptime with our swappable, material-matching print cores.

Main Features

  • Material matching: Get consistent, high-quality 3D printing results with customised nozzle geometry per material
  • Quick-to-change: Quickly swap print cores and switch between different material combinations for a more time-efficient workflow
  • More materials: Select from a huge portfolio of materials, including PLA, ABS, CPE, Nylon, and PP (CPE+, PC, TPU 95A, and Breakaway are not officially supported for 0.25 Print Core AA)
  • Accurate temperature reading: Maintain the perfect temperature for an even better quality print – with automatic, accurate temperature readings

Specifications:

Supported materials*:
0.25 Print core AA: PLA, ABS, CPE, Nylon, PP (CPE+, PC, TPU 95A, and Breakaway are not officially supported for 0.25 Print Core AA, please use 0.4mm Print Core AA for these materials)

*Do not use Print core AA for PVA support material

Nozzle size:
0.25mm

More information regarding Ultimaker 3 print cores can be found here.

*** UPDATE 11th May 2018***

Please note that new versions of the print core do not have silicon rings.

"The silicone nozzle ring has been removed from the nozzle of the print cores. The groove in the nozzle to fixate the silicone nozzle ring will also be removed on a short term. This applies to the print cores that come with the printer, as well as print cores that were purchased separately. This change is implemented to make the print cores compatible with the Ultimaker S5. Due to the nozzle cover of the Ultimaker S5, the front fan bracket will not close properly if the silicone nozzle ring is around the nozzle. On the Ultimaker 3, the silicone nozzle ring helps to close the seal between the nozzle and the silicone cover. However, R&D has decided the risk of removing the ring is negligible.

The print cores still function exactly the same on the Ultimaker 3. Customers can use the new print cores in the same way as the old ones that did include the silicone nozzle ring. Print cores with and without silicone nozzle rings can both be used on the Ultimaker 3."



Related Products

Adhesion Sheets
$46.90
Adhesion Sheets

Adhesion Sheets

Using an adhesion sheet is one of the most effective methods of ensuring your 3D print adheres to the build plate, producing consistent high-quality results. Learn how to apply ...

$46.90
×
BuildTak 228mmx 254mm
from $22.00
BuildTak 228mmx 254mm

BuildTak 228mmx 254mm

The Print surface of the BuiltTak is perfect prints even without heated bed, every time. Great for materials that require some additional help sticking to the bed. We would reco...

$22.00
×
Cleaning Filament
$32.90
Cleaning Filament

Cleaning Filament

The Ultimaker 3 cleaning filament is used for both print core maintenance and unclogging procedures. We recommend performing regular maintenance once every three months. Unclog ...

$32.90
×