Professional 3D printing just got more accessible. Maximise the print performance and machine uptime with our swappable, material-matching print cores. Main Features Material...
*Only compatible with Ultimaker S-Line 3D Printers Print high-strength composite materials with this wear resistant Print Core CC, for applications that require extra stiffnes...
Professional 3D printing just got more accessible. Maximise the print performance and machine uptime with our swappable, material-matching print cores. Make the most out of rel...
This grease can be used for lubrication of the lead screw of the Z motor according to the maintenance schedule, please ensure that existing grease on the parts are cleaned off p...
Capacitive Sensor Cable attaches the Capacitive Sensor board to the Print Head provides active levelling for the Ultimaker 3 and Ultimaker S5. This spare part is compatible with...
Capacitive Sensor Board provides active levelling for the Ultimaker 3 and Ultimaker S5. This spare part is compatible with the Ultimaker 3 / 3 Extended Ultimaker S3 Ultimaker...
Ultimaker S5 Bowden tube 85cm in length made from PFA. Outside diameter 0.25 inch, inside 0.125 inch is used to transport the filament to the extruder head. Includes two Clamp C...
The nozzle cover for the UltiMaker S7,S5 and S3 (with Touch Screen) shields the print cores from cold airflow from the fans, which helps the print cores to maintain a stable tem...
Using an adhesion sheet is one of the most effective methods of ensuring your 3D print adheres to the build plate, producing consistent high-quality results. Learn how to apply ...
Radial side fan for the Ultimaker 3 series and the S Series. The fans at the side of the print head spin during printing. This ensures that the layer of filament is properly coo...
Replacement EPA Filter for the S5 Air Manager and Ultimaker 2+ Connect EPA filter: Removes up to 95% of UFPs Filter Replacement - Recommended every 1,500 print hours
The axial fan at the front of the print head spins when one of the print cores is above 40 ºC. This helps to prevent the heat from the nozzle traveling too far upwards. Without ...
Glass print bed for the following models: Ultimaker S5
Glass Bed for the Ultimaker S3, Ultimaker 3 Series and the Ultimaker 2 Series Ultimaker S3 Ultimaker 3 Ultimaker 3 Extended Ultimaker 2+ Connect Ultimaker 2+ Ultimaker 2 Ext...
The Ultimaker 3 cleaning filament is used for both print core maintenance and unclogging procedures. We recommend performing regular maintenance once every three months. Unclog ...
Flexplate for UltiMaker S7. Replacement Ultimaker S7 PEI coated flexible build plate. Note the flexible buildplate id double sided and get be used on both sides. Before unpackin...
Total $0.00
