This grease can be used for lubrication of the lead screw of the Z motor according to the maintenance schedule, please ensure that existing grease on the parts are cleaned off p...

ONE NOZZLE TO RULE THEM ALLThe Olsson Ruby will work with a huge range of materials. PLA, ABS, CPE/PET, Nylon, and composites with abrasive additives such as Carbon fibre, Steel...

Calibration Card

Y Linear Shaft 350mm long Compatible with Ultimaker Original+ Ultimaker 2 Ultimaker 2 Extended Ultimaker 2+ Ultimaker 2 Extended+

X Linear Shaft 320mm long Compatible with Ultimaker Original+ Ultimaker 2 Ultimaker 2 Extended Ultimaker 2 Go Ultimaker 2+ Ultimaker 2 Extended+

Ball Bearing 688-2RS Compatible with Ultimaker Original+ Ultimaker 2 Ultimaker 2 Extended Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 2 Go

Tube Coupling Collet for your Ultimaker Bowden Tube Replacing the TUBE Collet - Instructions

Z Motor With Trapeziodal Screw for your Ultimaker Original+, UM2,UM2+, UM3. This product is not compatible with the Ultimaker Original 

Print Head Shaft X 320mm Compatible with Ultimaker Original+ Ultimaker 2 Ultimaker 2 Extended Ultimaker 2+ Ultimaker 2 Extended+

Print Head Shaft X Compatible with Ultimaker Original+ Ultimaker 2 Ultimaker 2 Extended Ultimaker 2+ Ultimaker 2 Extended+

Ball Bearing F688-2RS (10ST) Compatible with Ultimaker Original+ Ultimaker 2 Ultimaker 2 Extended Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 2 Go

The Clip holds your glass plate in place over your heated bed.   Instructions on replacing the clips. - Instructions This part is compatible with the Ultimaker Original+ Ultima...

Ultimaker 2 hot end isolator. This is the interface part between the PTFE Insulator and the Integrated Nozzle Block.  This part is compatible with the following Ultimaker 2 Ult...

Electronics Pack with Main Board v2.1.4 and Jumpers Compatible with Ultimaker Original+ Ultimaker 2 Ultimaker 2 Extended Ultimaker 2 Go Ultimaker 2+ Ultimaker 2 Extended+

Ultimaker 2 Pulley Pack Contains Timing Pulley 5mm Shaft GT2 1165 Timing Pulley 8mm Shaft GT2 1166 Timing Pulley Double 8mm Shaft GT2 1167 Set screw 1211 Compatible with Ulti...

UM (1758) - Short Belt 200mm long Used in all Ultimaker Models connecting the X or Y Motors to the Pulleys.

Take care of your 3D Printers by ensuring the rods are well lubricated to ensure the print head runs smoothly and reduces the strain on your stepper motors. 100ml Instructions o...

Clamp Clip- White Did you know you can also 3D Print these clips? You can download the STL File of the clamp clips from here, and print as many as you like. We recommend using T...

Print Head Shaft Y Compatible with UltiMaker 3

Ultimaker XY stepper motor Part no 2203 Compatible with Ultimaker 2 Ultimaker 2 Extended Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 3 Ultimaker 3 Extended

The Bowden tube, 70.5 cm long. Made from PFA. Outside diameter 0.25 inch, inside 0.125 inch is used to transport the filament to the extruder head. Includes two white Clamp Clip...

1 Assembled Belt components for the Ultimaker 2 Series. The Belts are 610mm long If you want to change the entire Ultimaker 2 Belts you need 4 sets of UM(9411) and two sets of U...

Take care of your Ultimaker 2+ and Ultimaker 2 Extended+ with ease and confidence. As an all-in-one solution, our Maintenance Kit contains all the necessary parts to make routin...

Linear bearings for the Print head, compatible with Ultimaker 2 Ultimaker 2 Extended Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 2 Go UMO UMO+

Knob Front Compatible with Ultimaker 2 Ultimaker 2 Extended Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 2 Go

OLED DISPLAY  Compatible with Ultimaker 2 Ultimaker 2 Extended Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 2 Go

OLED DISPLAY  Compatible with Ultimaker 2 Ultimaker 2 Extended Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 2 Go Ultimaker 3 Ultimaker 3 Extended

Mean Well Power Supply Unit - Model No GST220A24-R7B (24V / 9.20A) This power supply unit is compatible with: Ultimaker 2 Ultimaker 2 Extended Ultimaker 2+ Ultimaker 2 Extended...

Ultimaker 2+ Model Cooling Fan Compatible with Ultimaker 2+ Connect Ultimaker 2 Ultimaker 2 Extended Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 2 Go

Ultimaker 2+ Model Cooling Fan Compatible with Ultimaker 2+ Connect Ultimaker 2 Ultimaker 2 Extended Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 2 Go

  Heater Block for the Ultimaker 2 Series. Note that this component does not come with any nozzles.   This part is compatible with the Ultimaker 2 Ultimaker 2 Extended Ultimak...

Glass Bed for the Ultimaker S3, Ultimaker 3 Series and the Ultimaker 2 Series  Ultimaker S3 Ultimaker 3 Ultimaker 3 Extended Ultimaker 2+ Connect Ultimaker 2+ Ultimaker 2 Ext...

This is the Ultimaker 2+ TFM Teflon coupler.  Replace this part when your original TFM coupler shows signs of wear and friction in the tube. In our testing, this part may last 1...

This is the Ultimaker 2+ heater cartridge 24V 35W . It is the improved heater cartridge for the printhead for the Ultimaker 2+. This part is compatible with the following models...

This is the Ultimaker 2+ Metal Fan Bracket Installing the Fan Bracket - Installation Guide This part is compatible with the Ultimaker 2 Ultimaker 2 Extended Ultimaker 2+ Ultim...

Square Flanged Linear Bearing LMK12LUU (Misumi Brand) Compatible with Ultimaker 2 Ultimaker 2 Extended Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 2 Go Ultimaker Original+

Motor Spacer for Ultimaker 2 for X and Y Stepper Motors Compatible with Ultimaker 2 Ultimaker 2 Extended Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 2 Go

  End Stop Switch Pack Includes 1 x Limit Switch, Black Short Wire 1024 1 x Limit Switch, Blue Wire 2204  1 x Limit Switch, Red Wire 2205   This Power Adaptor is compatible wi...

Ultimaker 2+ PT100 B Sensor Glass Fibre. (part no 2288) This is the new improved Temperature sensor for the Ultimaker 2+. It does the temperature reading in the hot end.  Step b...

Ultimaker 2 Print Head Assembly  Compatible with Ultimaker 2 Ultimaker 2 Extended Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 2 Go Ultimaker 2+ Connect

The Advanced 3D Printing Kit contains several parts and add-ons to make your Ultimaker 2+ or Ultimaker 2 Extended+ even more reliable. The included items minimize downtime and s...

LED Strip with Cold White Color for your Ultimaker 2 The cable is compatible with the Ultimaker 2 RangeUltimaker 2 Go Ultimaker 2 Ultimaker 2+ Ultimaker 2 Extended Ultimaker 2 ...

Z-Linear Shaft for Ultimaker 2 Compatible with Ultimaker 2 Ultimaker 2+

Ultimaker 2+  (1306) - Hot-end Holder Bottom Compatible with Ultimaker 2 Ultimaker 2 Extended Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 2 Go

Ultimaker 2+  (1307) - Hot-end Holder Top Compatible with Ultimaker 2 Ultimaker 2 Extended Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 2 Go

Ultimaker 2+  (1308) - Hot-end Cooling Rib Compatible with Ultimaker 2 Ultimaker 2 Extended Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 2 Go

UM2+ (2294) - SHORT REEL HOLDER

A set of five Ultimaker 2+ 0.25 mm nozzles.Ensure continuous printing with a handy set of five 0.25 mm nozzles for the Ultimaker 2+ series. Quick and easy to change, they help y...