Polymaker Industrial PA6-GF 2Kg

Polymaker Industrial PA6-GF 2Kg - Imaginables Australia | Ultimaker & Dremel 3D Printers


$240.00  Incl. GST

PolyMide™ is a family of Nylon/polyamide based filaments. Produced with Polymaker’s Warp-Free™ technology, PolyMide™ filaments deliver engineering properties intrinsic to Nylon and ease of printing. PolyMide™ PA6-GF is a glass fiber reinforced PA6 (Nylon 6) filament. The material exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion.

We highly recommend to use a wear resistant nozzle, to print with the PolyBox™ and to keep it at dry conditions (relative humidity of 15% or less) at all times to maintain the best printing results.

POLYMIDE™ PA6-GF FEATURES FIBRE ADHESION™ AND WARP-FREE™ TECHNOLOGY

Warp-Free™ - Warp-Free™ technology enables the production of Nylon-based filaments that can be 3D printed with excellent dimensional stability and near-zero warpage. This is achieved by the fine control of microstructure and crystallisation behaviour of Nylon, which enables the material to fully release the internal stress before solidification.

Fibre Adhesion™ - Fiber Adhesion™ technology improves the layer adhesion of fibre reinforced materials, by optimising the surface chemistry of the fibres to achieve better dispersion and bonding to the matrix. This results in better strength along the Z-axis and reduced mechanical anisotropy.

FEATURES

Excellent Stiffness & Toughness - Featuring a tensile modulus of 4.4 GPA on the XY axis and 3.3 GPA on the Z axis, PolyMide™ PA6-GF is well suited for high performance industrial and engineering applications. PolyMide™ PA6-GF combines excellent stiffness and toughness. 

Excellent Heat Resistance - Featuring a heat deflection temperature of up to 191°C, PolyMide™ PA6-GF can be used to print parts working in a wide temperature range and has been utilised to create custom lab equipment working at temperatures as low as -190°C.

Outstanding Layer Adhesion - All other brands of fibre reinforced material show a decrease in z-axis layer adhesion when compared with their non-fibre reinforced Nylons, producing a part that is only stronger on the X-Y axis but detrimental to the Z axis. Polymakers new technology in PolyMide™ PA6-GF not only solves this problem but actually increases Z axis tensile strength creating more isotropic parts that are strong in every direction.

Wear Resistant and Strong - Parts printed in PolyMide™ PA6-GF display excellent strength and wear resistant properties.

Improved Printability – Unlike many other Nylon filaments, PolyMide™ PA6-GF is extremely easy to work with, exhibiting excellent dimensional stability. It is compatible with most filament-based 3D printers with no heated bed or chamber required!

Uncompromised Quality - Polymakers leading quality control process and rigorous in-house testing ensure reliable printing and consistency across spools and batches.

PolyMide PA6-GF available in 500g and 2kg rolls and in Grey. 500g Filament will fit in a Ultimaker Material Station

Please see attached pdf for recommended Print Settings and Mechanical Properties



Related Products

UltiMaker TPU 95A
$119.90
UltiMaker TPU 95A

UltiMaker TPU 95A

Weight: 0.75kg  Diameter: 2.85mm ULTIMAKER TPU 95A: WEAR AND TEAR RESISTANT Ultimaker TPU 95A is an easy and fast to print filament with a nice balance of flexibility, wear and ...

$119.90
×
UltiMaker Tough PLA
$86.90
UltiMaker Tough PLA

UltiMaker Tough PLA

Ultimaker Tough PLA Weight: 0.75kg Diameter: 2.85mm Length: Approximately 90m long Ultimaker Tough PLA combines impact, tensile and flexural strength similar to ABS, all with th...

$86.90
×
UltiMaker PVA - 750g
$169.90
UltiMaker PVA - 750g

UltiMaker PVA - 750g

PVA (Polyvinyl Alcohol) is a water soluble support material for multi-extrusion 3D printing. With a good thermal stability, Ultimaker PVA is ideal for printing complex models t...

$169.90
×